Introduction
Removing a tooth in the esthetic zone is one of the most challenging cases for implant dentists. Osseointegration is no longer the only criterion used to assess the success of an implant, but also the harmonious integration of the restoration with the peri-implant mucosa and adjacent teeth, parameters that are increasingly measured with objective parameters like the pink esthetic score and the white esthetic score [1, 2]. Therefore, survival rates are not a complete endpoint and the definition of successful implants has also been subject of systematic review [3].
The original protocols recommended the use of healed ridges with a long unloaded healing period [4]. In the last 20 years, treatment has increasingly been reduced to the installation of implants during extraction, and/or the restoration on the day of surgery: implants during extraction, and/or restoration on the day of surgery. It’s clear why it’s appealing. Quick placement and loading decreases the total treatment time and the number of interventions, and a provisional restoration can be beneficial to maintain soft-tissue architecture [4]. There have been prospective data on immediate placement and provisionalization of single maxillary anterior implants since the early 2000s [5].
There are disadvantages to these advantages. Immediate placement is technique sensitive and has been linked to a greater variability of esthetic outcome and to recession of the midfacial mucosa [6]. The authors of a multicentre randomized trial have found that immediate placement should not be recommended in cases in which esthetics is important and should only be attempted in selected cases [7]. An early meta-analysis also revealed greater failure rates with immediate loading of single implants compared to delayed loading [8]. So, there is a real paradox for clinicians and patients between speed and predictability.
The end of the story is that the time of implant placement is coupled with the loading time, which makes the question more complicated. An integrated classification was suggested by the International Team for Implantology (ITI), which includes both [9] and a 2026 update which added substantially to the evidence base [10]. Numerous studies compare combinations of protocols and making a determination as to the cause of the outcome relies on rather complicated analysis. The aim of this review is to compare immediate and delayed loading of implants in the esthetic zone, taking this interaction into account, and to translate the evidence into practical selection criteria.
Materials and methods
This is not a formal systematic review, but a structured narrative review. The author(s) of this review did not provide any protocol, did not generate any PRISMA flow diagram and did not undertake a formal risk-of-bias assessment. The sources were identified using targeted search of indexed biomedical literature, publisher and institutional repositories and the ITI consensus database which was finished in September 2026. International consensus reports, systematic reviews and meta-analyses, and randomized controlled trials and their long-term follow-up were prioritized.
Sources were selected if they were related to single-tooth or short-span esthetic zone (maxillary anterior and premolar region) implant therapy and included a comparison between immediate loading or immediate provisionalization with early, conventional or delayed loading, or if they discussed the tissue-level mechanisms or selection criteria that were relevant to that comparison. The following were the outcome variables of interest: implant survival, marginal bone level, peri-implant soft tissue (papilla and midfacial mucosa), esthetic indices and patient-reported outcomes. The abstracts and full texts of published estimates were used to obtain numerical estimates, which are presented with their original confidence intervals. Figures 1 and 2 are not new analyses, but are replots of published estimates. As no patient data were collected, ethical approval was not sought.
Terminology and biological rationale
Classification of loading and placement protocols
The loading protocols are divided into three categories according to the time interval between the implant placement and the fitting of a prosthesis: immediate loading (≤1 week), early loading (1 week to 2 months), and conventional loading (>2 months) [11, 12]. In this review, delayed loading is used as a synonym for conventional loading. Placement protocols are categorized relative to extraction — immediate (Type 1), early (Type 2 — soft tissue healing, 4–8 weeks [13]) and early (Type 3 — partial bone healing, 4–8 weeks) and late (Type 4 — healed ridge [9]). The combination of the two axes results in the ITI matrix, where for instance Type 1A means immediate placement in a healed ridge with immediate restoration or loading and Type 4C means placement in a healed ridge with conventional loading [4, 9] (Table 1).
Table 1. Vocabulary for loading and placement protocols in this review
| Term | Definition | Source |
|---|---|---|
| Immediate loading / restoration (A) | Prosthesis connected on the day of surgery or within 1 week of implant placement | [11, 12] |
| Early loading (B) | Loading between 1 week and 2 months after placement | [11, 12] |
| Conventional (delayed) loading (C) | Loading more than 2 months after placement | [11, 12] |
| Type 1 placement | Implant placed on the day of tooth extraction | [4, 9] |
| Type 2 placement | Early placement after soft-tissue healing (about 4–8 weeks) | [9, 13] |
| Type 3 placement | Early placement after partial bone healing | [9] |
| Type 4 placement | Late placement in a healed ridge | [9] |
| Type 1A | Immediate placement and immediate restoration/loading (same day or within 1 week) | [4] |
There’s another difference to consider in the esthetic zone. Functional loading is not a restoration made immediately with a screw-retained provisional that is intentionally not placed in occlusion. The majority of type 1A studies report no occlusal contacts within the provisional [4] and the patient-reported outcome literature has been established around this notion to such a great extent [14]. In practice, the comparison between «immediate vs. delayed loading» in the esthetic zone is therefore, comparing immediate provisionalization with a protocol where the implant is not restored during healing.
Primary stability and the bone–implant interface
Early and immediate loading puts the bone–implant interface under functional loads before the process of osseointegration is finished. The biological requirement is thus good primary stability. The Cochrane review of loading times found that high insertion torque, ≥35 Ncm, seems to be necessary for successful immediate/early loading [11]. Systematic review of single implant crowns recommended against immediate and early loading in the absence of primary stability (20-45 Ncm on insertion torque and/or implant stability quotient 60–65), systemic and locally contraindicated situations (parafunction and large bone defects), and the lack of clinical benefit outweighing the risk [12, 15].
In the Type 1A literature, 34 studies used a minimum insertion torque ranging from 30 to 45 Ncm, 5 studies used 20 to 25 Ncm and 10 studies reported a resonance frequency threshold from 60 to 71 ISQ [4]. There was no significant difference in pooled survival between studies that had a criterion of 35 Ncm (97.5%) and those with lower criteria (98.1%) because of the strict selection process and the rare reporting of the actual torque achieved [4]. The small randomized studies of the primary stability and esthetic indices are still being investigated [16].
Post-extraction remodelling and the facial bone wall
Without understanding what changes to the socket, there would be no way to know if it was loaded. The experimental studies indicate that any alterations in ridges may occur even after the implant was placed in a fresh extraction site [17] while various clinical reviews have confirmed that the timing of implant placement after extraction has an impact on the tissue outcome [18–20]. In the anterior maxilla, the facial bone wall is often very thin [21] and in 2 retrospective studies in which the sites were treated using bone grafting for Type 1 placement, it was not seen on cone-beam CT in 36% and 57%, respectively, of the sites, with more midfacial mucosa recession in such areas [6]. The immediate tooth replacement also has a modification of the gingival response if the facial bone defect morphology is different [22]. Careful case selection and surgical technique are reported as important aspects of extraction-socket placement and to optimize esthetic results [23–25].
Peri-implant soft tissue and the papilla
The height of interproximal papilla is related to the distance from the contact point to the bone crest [26] and the diagnostic factors that can be evaluated prior to treatment are crucial to ensure predictable peri-implant esthetics [27]. A provisional restoration at the time of surgery can help to support the mucosa and help the profile of the emergence [4]. Whether this means a clinically detectable difference when the delay is used when compared with a normal approach is the subject of the next section.
Synthesis of the clinical evidence
Implant survival
The Cochrane review did not provide convincing evidence that there was any clinically important difference between immediate, early and conventional loading regarding prosthesis failure, implant failure or bone loss, but the level of evidence was very low [11]. The first meta-analysis that was limited to isolated implant crowns was less reassuring with a higher risk of failure with immediate loading (relative risk 5.07; 95% CI 2.00–12.84) and, in the absence of a significant difference, a similar result was obtained when the randomized trials were pooled [8]. This signal was not confirmed in subsequent analyses of randomised trials. No difference was found in 1-year survival rates (odds ratio 0.75, 95% CI 0.32 to 1.76) and there was no difference after 5 years [15] following 10 trials comparing immediate and conventional loading of single crowns. Seven randomized trials and 386 implants were included in a meta-analysis limited to the esthetic zone that yielded 1-year risk ratio of 0.99 (95% CI 0.95 to 1.02) [28]. The principal syntheses are summarized in Table 2.
Table 2. The following are the main systematic reviews and consensus syntheses related to loading timing in the esthetic zone
| Reference | Scope | Main findings |
|---|---|---|
| Esposito et al. 2013 [11] | Cochrane review; immediate (≤1 week), early and conventional loading | No convincing evidence of a clinically important difference in prosthesis failure, implant failure or bone loss; very low quality evidence; torque ≥35 Ncm a prerequisite |
| Atieh et al. 2009 [8] | 5 studies, 248 single-implant crowns | Higher failure with immediate loading (RR 5.07; 2.00–12.84); RCT-only pooling similar but not significant |
| Benic et al. 2014 [15] | 10 RCTs immediate vs conventional; 1 RCT immediate vs early | 1-year survival OR 0.75 (0.32–1.76); marginal bone SMD −0.05 mm (−0.41 to 0.31); no differences up to 5 years; esthetics and satisfaction data inconclusive |
| Yan et al. 2016 [29] | 13 RCTs of single-tooth implants in the esthetic zone | No significant difference in bone-level change between immediate and conventional restoration or loading |
| Cheng et al. 2020 [28] | 7 RCTs, esthetic zone, ≥1 year follow-up | Survival RR 0.99 (0.95–1.02); no significant differences in marginal bone, papillae or midfacial mucosa |
| Chen and Buser 2014 [6] | 50 records on immediate (Type 1) vs early (Type 2–3) placement | Midfacial recession >1 mm in 9–41% (median 26%) of Type 1 sites vs none in early placement sites |
| Hamilton et al. 2023 [4] | 68 studies of Type 1A, maxillary 15–25 | Weighted mean survival 97.7% (96.9–98.4) at a mean of 2.8 years; strict selection criteria in all studies |
| Huynh-Ba et al. 2018 [14] | Patient-reported outcomes, immediate placement | No difference between immediate provisionalization and conventional loading; no data on early loading |
| Gallucci et al. 2026 [10] | 140 studies (42 RCTs), 10,456 implants, all protocol combinations | Type 1A survival about 98%; Type 1B the most uncertain pathway; Type 4C the conservative benchmark |
Most of the data is available for Type 1A. Across 68 studies and 2,531 implants, the weighted mean survival was 97.7% (95% CI 96.9 to 98.4), with a mean follow-up of 2.8 years [4]. The vast majority of the losses happened early: 43 out of 49 losses for which time of failure was known (87.8%) happened in the first 6 months [4]. In the studies published after 2012, the survival rate increased (98.2% vs. 96.3% before 2012) and this might be attributed to increased operator experience and advances in implant technology [4]. The authors emphasized that all included studies had strict inclusion criteria and that the planned Type 1A protocol could only be performed in 85–100% of cases, typically due to facial bone fracture on extraction or to insufficient torque of insertion [4]. The 2026 update reported high survival for Type 1A and early loading as the pathway with the least evidence and poor survival (Type 1B) (Fig. 1).

Marginal bone and soft tissue
There is no pooled randomized evidence that indicates that there is a difference in marginal bone level between loading protocols. Benic et al. found a standardized mean difference of −0.05 mm (95% CI −0.41 to 0.31) at 1 year and no difference at 2, 3 or 5 years [15]. Nor was there any significant difference at 1 year (mean difference 0.03 mm, 95% CI −0.09 to 0.15) or at 2 years (mean difference −0.01 mm, 95% CI −0.16 to 0.15) for the mesial papilla, distal papilla, and midfacial mucosa (Fig. 2) [28]. Other researchers, Yan et al., found the same results in a larger group of 13 randomized trials [29]. There is contradictory evidence with regards to the buccal mucosa; Benic et al. stated that there was no conclusive evidence as to recession because of the heterogeneity and conflicting evidence [15].

Fig. 2 has large confidence intervals. The interval for the midfacial mucosa is clinically relevant ranging from −1.17 to 0.50 mm. Therefore, the term «no significant difference» is not to be interpreted as «proof of equivalence» but rather as «absence of proof of difference». There were only two trials that reported esthetic outcome and three that reported patient satisfaction. [28].
Esthetic outcomes: the role of placement timing
The best indications of esthetic risk are derived from comparisons of placement timing (not loading timing) and are relevant because both concepts are used in practice. The 124 patients in the timing randomized trial were split into two groups: immediate placement and placement 12 weeks after the extraction. Patients who required immediate placement experienced more bone augmentation (72% vs. 43.9%), more wound failures (26.1% vs. 5.3%) and less adequate pink esthetic scores (42% vs. 19%) than those who had delayed placement and also showed no difference in patient-reported outcomes [7]. In a systematic review conducted by the authors, the median rate of midfacial recession of more than 1 mm at 1–3 years was found in immediately placed sites, while two studies of early placement reported no midfacial recession [6].
Early placement with contour augmentation has given good esthetic outcomes with a mean combined pink and white esthetic score of 14.7 (maximum 20) in 45 patients at 2–4 years [2] and at 12 years [13] and 2–4 years [30, 31] after the surgery. Immediate placement can also achieve good results, especially in cases where the morphology of the defect is benign and the tissues are favorable [22, 32, 33]. Various surgical and restorative techniques have been investigated to prevent midfacial recession at immediate implants [34] and hard- and soft-tissue effects of immediate placement and restoration of the anterior maxilla have been assessed [35]. In a recent narrative review, atraumatic extraction and accurate 3D positioning of the implant and appropriate soft tissue management emerged as the key success factors [36].
Immediate placement with immediate provisionalization
A meta-analysis of immediate implants placed in the esthetic zone and immediate provisionalization found excellent immediate implant survival and minimal soft and hard tissue dimensional changes [37]. The data are randomized data with direct loading contrast, from the Groningen group. In the study, the patients (40) who had a failing maxillary anterior tooth were randomly allocated into two groups, each group receiving an immediately placed implant, either immediately or after 3-month delayed provisionalization, and the final crown was placed 3 months after provisionalization [38, 39]. At 5 years, no difference was observed between the two methods [39] and the 10-year follow-up study confirmed that: long-term clinical outcomes were comparable; and immediate provisionalization reduced the time to function and time to esthetic outcome [40]. The trials are small and have only been undertaken at a single centre with non-smoking patients who do not suffer from bruxism, limiting the generalizability.
Patient-reported outcomes
The patient perspective of the ITI consensus is that outcomes are similar, positive and comparable with immediate provisionalization and conventional loading, as reported by patients and based on one randomized and two controlled clinical trials [14]. No study was found regarding early loading of immediately placed implants and placement with immediate provisionalization in one space in the anterior or premolar area of the maxilla was associated with positive outcomes such as significant improvement in OHIP-14 scores [14]. A timing trial also demonstrated no difference in patient-reported outcomes for immediate vs. delayed placement [7]. So, the main advantage for the patient of the immediate loading seems to be that they do not require a temporary prosthesis and may not need to be treated for as long.
Extended edentulous spans
All but a little of the evidence cited above is limited to single-tooth gaps. A systematic review of the literature regarding multiple implant immediate loading in the anterior zone showed that there was no evidence for immediate loading of multiple implants and further studies were needed before immediate loading could be recommended in clinical practice [12]. The results of single tooth studies cannot be applied to multi-unit anterior restorations.
Comparative synthesis
Table 3 summarizes the comparison between immediate and delayed loading, in the domains mentioned above. The big picture is that the pathway for survival is generally equivalent to the pathway for bone outcomes and patient-reported outcomes under certain conditions, but the pathway is real and less precisely described for the soft-tissue and esthetic domain, and is highly reliant on technique and case selection for the immediate pathway.
Table 3. Immediate and delayed loading in the esthetic zone (in the absence of any reference)
| Domain | Immediate loading / provisionalization | Delayed (conventional) loading | Sources |
|---|---|---|---|
| Treatment time | Shorter; fewer interventions; fixed provisional from the day of surgery | Longer; interim prosthesis needed during healing | [4, 40] |
| Implant survival | Comparable in pooled RCTs (RR 0.99 at 1 year); about 97.7% for Type 1A in selected cases; one early meta-analysis found higher failure | Reference protocol; differences rated very low quality | [4, 8, 11, 28] |
| Marginal bone | No significant difference at 1 to 5 years | Reference | [15, 28, 29, 39] |
| Papilla and midfacial mucosa | No significant pooled difference; wide confidence intervals; conflicting data on recession | Reference; recession risk is mainly linked to immediate placement, not to loading | [6, 15, 28] |
| Esthetic indices | Few trials; inconclusive. Inadequate PES in 42% with immediate vs 19% with delayed placement | As left (placement effect) | [7, 15, 28] |
| Patient-reported outcomes | Similar to conventional loading; OHIP-14 improved | Similar | [7, 14] |
| Technique sensitivity | High: requires stability, occlusal control and coordinated surgical and prosthetic work | Lower | [4, 15] |
| Main prerequisites | Torque 20–45 Ncm and/or ISQ 60–65 (≥35 Ncm preferred); no parafunction; intact facial wall; thick phenotype; no acute infection | Fewer; site and soft-tissue management still needed | [4, 11, 15] |
Clinical decision-making
Evidence is in support of selective and not routine use of immediate loading. Hamilton et al. categorised the site and patient characteristics that are present in Type 1A studies as low, medium and high risk (Table 4) [4]. All the conditions must be present for a low risk Type 1A approach: when the patient is healthy, the esthetic risk is low to medium, the soft tissue phenotype is thick, the facial bone wall is at least 1 mm thick and intact, and there is no acute infection. The authors pointed out that few patients would meet all these criteria and for those who do not, another protocol is warranted [4].
Table 4. Adapted from Hamilton et al. [4] the following categories are used to classify the risk of immediate placement and immediate loading of a single implant
| Factor | Low risk | Medium risk | High risk |
|---|---|---|---|
| Esthetic risk (patient) | Low to medium | High | Significant esthetic compromise expected |
| Gingival margin | No recession | Minor recession | Recession ≥2 mm |
| Soft-tissue phenotype | Thick | Thin, or limited keratinized tissue | No keratinized tissue |
| Facial bone wall | ≥1 mm thick | <1 mm, or small fenestration/dehiscence | Significant fenestration or dehiscence |
| Periapical infection | Absent | Chronic | Acute |
| Periodontal status | Healthy | Controlled disease | Active disease |
| Gap between facial bone and implant | >2 mm | 1–2 mm | <1 mm |
| Primary stability (insertion torque) | 30–45 Ncm | 20–30 Ncm | <20 Ncm |
| Occlusal scheme | No direct occlusal contacts | Minimal contact and/or shared guidance | Main determinant of anterior guidance |
| Parafunction | Absent | — | Present |
| Tooth position | Incisors and premolars | Canine | Molars |
These are translated into a decision pathway in Fig. 3. It is a conceptually combined overview of criteria mentioned in this review [4, 7, 11, 14, 15] and does not represent a clinical guideline validated by clinical trials. There are two decisions points that stand prominent. The first is the site assessment prior to surgery — if there is one or more of the high risk factors (particularly a thin phenotype, deficient facial wall and acute infection), early placement with contour augmentation or another staged protocol is more conservative [6, 7]. The second one is intra-operative evaluation of the primary stability: If the torque or ISQ was not reached, the plan should be changed to delayed loading, and protected with a healing abutment or a cover screw. The feasibility of the planned Type 1A protocol may be compromised by facial bone fracture and low torque for some series [4] so there should be a contingency plan agreed to in advance with the patient.

In most of the Type 1A studies [4] immediate loading will be selected and the provisional should not have centric and eccentric contact [5]. The patient should be apprised of increased technical requirements, the possibility for changes in the surgical plan during the operation and the risk of midfacial recession, which is primarily due to immediate placement [6].
Limitations of the evidence and of this review
The conclusions are limited by a number of factors. First, evidence on the randomized trials is limited. The seven trials in the esthetic-zone meta-analysis all had unclear risk of bias and included only 386 implants [28] with the evidence being graded as very low quality by the Cochrane authors [11]. Secondly, follow up is brief compared to the likely lifespan of a restoration: for the Type 1A review, the mean follows up was 2.8 years, and the maximum dropout rate among individual studies was 41.8% [4]. Third, there is a high degree of selection bias: all the Type 1A studies had strict inclusion criteria, and thus, the survival rates are applicable to patients who were similarly selected [4]. Fourthly, the timing of loading and placement is confounded, and there are few data available supporting some pathways, particularly Type 1B [10]. Fifth, esthetic outcome and patient satisfaction was reported in only a few trials and using a variety of outcome measures [15, 28]. Last, the studies vary with regard to their definition of success and survival [3].
Like most reviews, the present one has its own drawbacks. It is not systematic as the search was not comprehensive and relies on published summary of pooled data. It also does not provide an independent evaluation of the quality of the studies. Conclusions may thus have been missed because of new randomized trials that have been published since the syntheses included here were completed; and they are subject to revisions as new ITI consensus documents are released.
Directions for future research
Future trials should be conducted in well-defined risk groups with sample size calculation and blind outcome assessment and be a comparison between immediate and delayed loading. They should report the achieved insertion torque and insertion spread quality (ISQ) distribution, not just the threshold and they should use an intention-to-treat analysis, which was reported by only 23 of the 68 Type 1A studies [4]. Standardised esthetic endpoints, such as the pink and white esthetic scores [1, 2] should be used together with validated patient-reported endpoints and at least 5 years of follow-up. Although digitally planned, prosthetically driven placement is widely used in practice, the literature reviewed here does not contain any comparative data on loading timing, as this is an obvious missing piece. Finally, studies of multi-unit anterior restorations are needed, given the lack of evidence in this situation [12].
Conclusions
Based on the available evidence, the immediate loading of a single implant achieved similar long-term implant survival, intrabony status and patient-reported outcomes compared with delayed loading of the same implants when patients and sites are carefully selected and a sufficient level of primary stability is achieved. The esthetic risk is influenced more by the time of placement and facial bone wall shape and soft-tissue phenotype than the time of loading, but confidence intervals for mucosal outcomes are large and esthetic data from randomized trials are limited. The selection of such cases for immediate loading should therefore be considered as an option, provided that the benefit to the patient outweighs the extra technical challenges, and that there is an alternative to immediate loading. When the criteria are not satisfied, early placement or conventional loading are still deemed to be the safe criteria. These recommendations need to be further refined by larger and longer randomized controlled studies using standardized esthetic and patient-reported outcomes.
References
- 1. Fürhauser R., Florescu D., Benesch T. et al. (2005) Evaluation of soft tissue around single-tooth implant crowns: the pink esthetic score. Clin. Oral Implants Res., 16(6): 639–644. doi: 10.1111/j.1600-0501.2005.01193.x.
- 2. Belser U.C., Grütter L., Vailati F. et al. (2009) Outcome evaluation of early placed maxillary anterior single-tooth implants using objective esthetic criteria: a cross-sectional, retrospective study in 45 patients with a 2- to 4-year follow-up using pink and white esthetic scores. J. Periodontol., 80(1): 140–151. doi: 10.1902/jop.2009.080435.
- 3. Papaspyridakos P., Chen C.J., Singh M. et al. (2012) Success criteria in implant dentistry: a systematic review. J. Dent. Res., 91(3): 242–248. doi: 10.1177/0022034511431252.
- 4. Hamilton A., Gonzaga L., Amorim K. et al. (2023) Selection criteria for immediate implant placement and immediate loading for single tooth replacement in the maxillary esthetic zone: a systematic review and meta-analysis. Clin. Oral Implants Res., 34(Suppl. 26): 304–348. doi: 10.1111/clr.14109.
- 5. Kan J.Y.K., Rungcharassaeng K., Lozada J. (2003) Immediate placement and provisionalization of maxillary anterior single implants: 1-year prospective study. Int. J. Oral Maxillofac. Implants, 18(1): 31–39.
- 6. Chen S.T., Buser D. (2014) Esthetic outcomes following immediate and early implant placement in the anterior maxilla — a systematic review. Int. J. Oral Maxillofac. Implants, 29(Suppl.): 186–215. doi: 10.11607/jomi.2014suppl.g3.3.
- 7. Tonetti M.S., Cortellini P., Graziani F. et al. (2017) Immediate versus delayed implant placement after anterior single tooth extraction: the timing randomized controlled clinical trial. J. Clin. Periodontol., 44(2): 215–224. doi: 10.1111/jcpe.12666
- 8. Atieh M.A., Atieh A.H., Payne A.G.T., Duncan W.J. (2009) Immediate loading with single implant crowns: a systematic review and meta-analysis. Int. J. Prosthodont., 22(4): 378–387.
- 9. Gallucci G.O., Hamilton A., Zhou W. et al. (2018) Implant placement and loading protocols in partially edentulous patients: a systematic review. Clin. Oral Implants Res., 29(Suppl. 16): 106–134. doi: 10.1111/clr.13276.
- 10. Gallucci G.O., Hamilton A., Akhondi S. et al. (2026) Current state of evidence for implant placement and loading in partially edentulous patients: a systematic review. Clin. Implant Dent. Relat. Res., 28(1): e70120. doi: 10.1111/cid.70120.
- 11. Esposito M., Grusovin M.G., Maghaireh H., Worthington H.V. (2013) Interventions for replacing missing teeth: different times for loading dental implants. Cochrane Database Syst. Rev., 3: CD003878. doi: 10.1002/14651858.CD003878.pub5.
- 12. Schrott A., Riggi-Heiniger M., Maruo K., Gallucci G.O. (2014) Implant loading protocols for partially edentulous patients with extended edentulous sites — a systematic review and meta-analysis. Int. J. Oral Maxillofac. Implants, 29(Suppl.): 239–255. doi: 10.11607/jomi.2014suppl.g4.2.
- 13. Buser D., Halbritter S., Hart C. et al. (2009) Early implant placement with simultaneous guided bone regeneration following single-tooth extraction in the esthetic zone: 12-month results of a prospective study with 20 consecutive patients. J. Periodontol., 80(1): 152–162. doi: 10.1902/jop.2009.080360.
- 14. Huynh-Ba G., Oates T.W., Williams M.A.H. (2018) Immediate loading vs. early/conventional loading of immediately placed implants in partially edentulous patients from the patients’ perspective: a systematic review. Clin. Oral Implants Res., 29(Suppl. 16): 255–269. doi: 10.1111/clr.13278.
- 15. Benic G.I., Mir-Mari J., Hämmerle C.H.F. (2014) Loading protocols for single-implant crowns: a systematic review and meta-analysis. Int. J. Oral Maxillofac. Implants, 29(Suppl.): 222–238. doi: 10.11607/jomi.2014suppl.g4.1.
- 16. Sanchez-Perez A., Nicolas-Silvente A.I., Sanchez-Matas C. et al. (2021) Primary stability and PES/WES evaluation for immediate implants in the aesthetic zone: a pilot clinical double-blind randomized study. Sci. Rep., 11(1): 20024. doi: 10.1038/s41598-021-99218-8.
- 17. Araújo M.G., Sukekava F., Wennström J.L., Lindhe J. (2005) Ridge alterations following implant placement in fresh extraction sockets: an experimental study in the dog. J. Clin. Periodontol., 32(6): 645–652.
- 18. Schropp L., Isidor F. (2008) Timing of implant placement relative to tooth extraction. J. Oral Rehabil., 35(Suppl. 1): 33–43.
- 19. Chen S.T., Wilson T.G.Jr., Hämmerle C.H.F. (2004) Immediate or early placement of implants following tooth extraction: review of biologic basis, clinical procedures, and outcomes. Int. J. Oral Maxillofac. Implants, 19(Suppl.): 12–25.
- 20. Chen S.T., Buser D. (2009) Clinical and esthetic outcomes of implants placed in postextraction sites. Int. J. Oral Maxillofac. Implants, 24(Suppl.): 186–217.
- 21. Buser D., Martin W., Belser U.C. (2004) Optimizing esthetics for implant restorations in the anterior maxilla: anatomic and surgical considerations. Int. J. Oral Maxillofac. Implants, 19(Suppl.): 43–61.
- 22. Kan J.Y., Rungcharassaeng K., Sclar A., Lozada J.L. (2004) Effects of the facial osseous defect morphology on gingival dynamics after immediate tooth replacement and guided bone regeneration: 1-year results. J. Oral Maxillofac. Surg., 65(7 Suppl. 1): 13–19. doi: 10.1016/j.joms.2007.04.006.
- 23. Hämmerle C.H.F., Chen S.T., Wilson T.G.Jr. (2004) Consensus statements and recommended clinical procedures regarding the placement of implants in extraction sockets. Int. J. Oral Maxillofac. Implants, 9(Suppl.): 26–28.
- 24. Chen S.T., Beagle J., Jensen S.S. et al. (2009) Consensus statements and recommended clinical procedures regarding surgical techniques. Int. J. Oral Maxillofac. Implants., 24(Suppl.): 272–278.
- 25. Morton D., Chen S.T., Martin W.C. et al. (2014) Consensus statements and recommended clinical procedures regarding optimizing esthetic outcomes in implant dentistry. Int. J. Oral Maxillofac. Implants, 29(Suppl.): 216–220. doi: 10.11607/jomi.2013.g3.
- 26. Tarnow D.P., Magner A.W., Fletcher P. (1992) The effect of the distance from the contact point to the crest of bone on the presence or absence of the interproximal dental papilla. J. Periodontol., 63(12): 995–996.
- 27. Kois J.C. (2001) Predictable single-tooth peri-implant esthetics: five diagnostic keys. Compend Contin. Educ. Dent., 22(3): 199–206.
- 28. Cheng Q., Su Y.Y., Wang X., Chen S. (2020) Clinical outcomes following immediate loading of single-tooth implants in the esthetic zone: a systematic review and meta-analysis. Int. J. Oral Maxillofac. Implants, 35(1): 167–177. doi: 10.11607/jomi.7548.
- 29. Yan Q., Xiao L.Q., Su M.Y. et al. (2016) Soft and hard tissue changes following immediate placement or immediate restoration of single-tooth implants in the esthetic zone: a systematic review and meta-analysis. Int. J. Oral Maxillofac. Implants, 31(6): 1327–1340. doi: 10.11607/jomi.4668.
- 30. Buser D., Bornstein M.M., Weber H.P. et al. (2008) Early implant placement with simultaneous guided bone regeneration following single-tooth extraction in the esthetic zone: a cross-sectional, retrospective study in 45 subjects with a 2- to 4-year follow-up. J. Periodontol., 79(9): 1773–1781. doi: 10.1902/jop.2008.080071.
- 31. Buser D., Chappuis V., Bornstein M.M. et al. (2013) Long-term stability of contour augmentation with early implant placement following single-tooth extraction in the esthetic zone: a prospective, cross-sectional study in 41 patients with a 5- to 9-year follow-up. J. Periodontol., 84(11): 1517–1527.
- 32. Chen S.T., Darby I.B., Reynolds E.C. (2007) A prospective clinical study of non-submerged immediate implants: clinical outcomes and esthetic results. Clin. Oral Implants Res., 18(5): 552–562. doi: 10.1111/j.1600-0501.2007.01388.x.
- 33. Cosyn J., Eghbali A., De Bruyn H. et al. (2011) Immediate single-tooth implants in the anterior maxilla: 3-year results of a case series on hard and soft tissue response and aesthetics. J. Clin. Periodontol., 38(8): 746–753.
- 34. 3Lin G.H., Chan H.L., Wang H.L. (2014) Effects of currently available surgical and restorative interventions on reducing midfacial mucosal recession of immediately placed single-tooth implants: a systematic review. J. Periodontol., 85(1): 92–102.
- 35. Weigl P., Strangio A. (2016) The impact of immediately placed and restored single-tooth implants on hard and soft tissues in the anterior maxilla. Eur. J. Oral Implantol., 9(Suppl. 1): S89–S106.
- 36. Jurado C.A., Garcia-Torres F., Rojas-Rueda S. et al. (2025) Evaluating the success of immediate implants in the esthetic zone: a narrative review with case illustration. Dent. J. (Basel), 13(8): 365. doi: 10.3390/dj13080365.
- 37. Slagter K.W., den Hartog L., Bakker N.A. et al. (2014) Immediate placement of dental implants in the esthetic zone: a systematic review and pooled analysis. J. Periodontol., 85(7): e241–e250.
- 38. Slagter K.W., Meijer H.J.A., Bakker N.A. et al. (2015) Feasibility of immediate placement of single-tooth implants in the aesthetic zone: a 1-year randomized controlled trial. J. Clin. Periodontol., 42: 773–782.
- 39. Slagter K.W., Raghoebar G.M., Hentenaar D.F.M. et al. (2021) Immediate placement of single implants with or without immediate provisionalization in the maxillary aesthetic region: a 5-year comparative study. J. Clin. Periodontol., 48(2): 272–283. doi: 10.1111/jcpe.13398.
- 40. Donker V.J.J., Raghoebar G.M., Slagter K.W. et al. (2024) Immediate implant placement with immediate or delayed provisionalization in the maxillary aesthetic zone: a 10-year randomized trial. J. Clin. Periodontol. doi: 10.1111/jcpe.13971.
Порівняльна оцінка протоколів негайного та відстроченого навантаження зубних імплантатів в естетичній зоні: структурований оглядовий аналіз
Університет Мосула, Мосул, Ірак
Резюме. Визначення часу навантаження є ключовим рішенням при імплантації в естетичній зоні, коли пацієнти прагнуть скоротити тривалість лікування, а стан навколоімплантатних тканин не залишає права на помилку. Методи. Проведено цілеспрямований пошук міжнародних консенсусних звітів, систематичних оглядів, метааналізів та рандомізованих досліджень (опублікованих до вересня 2026 р.). Нових метааналізів не проводили; дані з наявних публікацій були систематизовані та опрацьовані. Результати. Аналіз об’єднаних даних рандомізованих досліджень не виявив суттєвих відмінностей між негайним і традиційним навантаженням щодо виживаності імплантатів через 1 рік (відносний ризик 0,99; 95% довірчий інтервал (ДІ) 0,95–1,02), втрати маргінальної кістки або рівня сосочків і слизової оболонки в ділянці середини коронки. У той самий час ці дослідження були невеликими за обсягом, а ризик систематичної помилки залишався невизначеним. За результатами 68 досліджень, зважений середній показник виживаності імплантантів при негайній імплантації з негайним навантаженням (тип 1A) перевищив 97,7% (95% ДІ 96,9–98,4%) хоча в них брала участь обмежена кількість пацієнтів і центрів. Негайна імплантація пов’язана з більшим відхиленням від бажаного естетичного результату та рецесією слизової оболонки в ділянці середини коронки (відзначалася у >26% випадків; медіана величини рецесії — 1 мм). Щодо результатів, оцінених самими пацієнтами, різниці між негайним встановленням тимчасової реставрації та традиційним навантаженням не виявлено. Висновки. Негайне навантаження є прийнятним варіантом у ретельно відібраних випадках (заміна одного зуба) за умови достатньої первинної стабільності, збереженої вестибулярної кісткової стінки, товстого біотипу м’яких тканин та використання тимчасової реставрації, яка не бере участі в оклюзійних контактах. За відсутності цих умов безпечнішим підходом залишаються відстрочене навантаження або рання імплантація. Попри велику кількість короткострокових досліджень, існує потреба у якісних довгострокових клінічних дослідженнях зі стандартизованими критеріями оцінки естетичних результатів.
Ключові слова: зубні імплантати, естетична зона, негайне навантаження, традиційне навантаження, негайне встановлення тимчасової реставрації, оцінка параметрів рожевої естетики, систематичний огляд.
Information about the author: Harith Ali Adel — Department of Conservative Dentistry, College of Dentistry, University of Mosul, Mosul, Iraq. E-mail: [email protected] |
Інформація про автора: Харіт Алі Адель — кафедра консервативної стоматології, стоматологічний факультет, Університет Мосула, Мосул, Ірак. E-mail: [email protected] |
Надійшла до редакції/Received: 07.11.2026
Прийнято до друку/Accepted: 11.11.2026
